Home Up Search              

                     TARKSOL GREEN

 

 

 

 

TarksolÒ Crystal Coat VOC Compliant Lacquer Clear Coating

Solvent Based  VOC Compliant

U.S. Patent Pending

  Tarksol Crystal Coat is a VOC compliant acetate lacquer coating that will dry in minutes, to a very flexible film that has the highest degree of resistance to chemicals, oils, greases, salt, and UV Light. Tarksol Crystal Coat offers superior toughness and hardness as compared to films prepared from other esters or resins. The outstanding oil, moisture, and weather resistance of Tarksol Crystal Coat, along with its toughness, may be used to an advantage as a wire and cable lacquer. This coating can be applied to ignition cables and other specialized wiring that must have good electrical properties and resistance to grease and abrasion. Tarksol Crystal Coat is an excellent Tire Dressing, especially where silicone can not be tolerated, in body shops.

  Applications:

   Coating for cloth

Coating for leather

Coating for paper/paperboard

Coating for fiber board

Coating for wood

General coatings

Coating for metal

Non silicone tire coating/dressing

Coating for plastic

Pigmented Color Coatings

Coating for glass

Coating for decorative solid acrylics

Exterior & Interior decretive coatings

Wire coating

  Advantages:

·         High Gloss

·         Lightweight lacquer coating

·         Durable

·         Extreme weather resistance

·         Oil resistant

·         Moisture resistant

·         Chemical resistant

·         Salt resistant

·         Solvent based with no VOC’s

·         UV Light resistant

·         Fast drying

·         FDA approved for food contact

·         Excellent adhesion to all types of substrates

  Environmental:

Tarksol Crystal Coat is a solvent based lacquer that meets all Federal and state VOC Regulations. (See MSDS)

 

FDA Status:

In accordance with the food additives regulations published in the United States Food and Drug Administration (FDA), cellulose acetate butyrate (Tarksol Crystal Coat) is lawful for use in certain food-contact applications subject to any limitations in the regulations listed below.  

21 CFR 175.105 – Adhesives

21 CFR 176.170 – Components of Paper and Paperboard in Contact with Aqueous and Fatty Foods

 

21 CFR 175.230 – Hot – Melt Strippable Food Coatings

 

21 CFR 176.180 – Components of Paper and Paperboard in Contact with Dry Foods

 

21 CFR 175.300 – Resinous and Polymeric Coatings

 

21 CFR 177.1200 – Cellophane

 

21 CFR 175.380 – Epoxy Resins

 

21 CFR 177.1210 – Closures with Sealing Gaskets for Food Containers

 

21 CFR 175.390 – Zinc-Silicone Dioxide Matrix Coatings

 

21 CFR 177.1400 – Water-Insoluble Hydroxyethyl Cellulose Film

Physical Properties:

Appearance and Odor----------- Clear liquid, with solvent odor

Boiling Point------------------------ 120˚ F

Vapor Pressure (mm Hg)-------Not established

Specific Gravity-------------------- 0.81

pH------------------------------------- Not applicable

Solubility in water---------------- Negligible

Solubility in other solvents-----Soluble In hydrocarbon solvents

Total volatility-----------------------74%

VOC (lbs)-----------------------------0

Dielectric strength-----------------784-984 kv/cm

Flash Point--------------------------142 deg F. Tag Closed Cup

 

 


 

 

 

 

 

Home ] Up ]

Send mail to webmaster@tarksol.com with questions or comments about this web site.
Last modified: November 25, 2008